2210 W. Lazelle Street, Suite A
Sturgis, South Dakota
Providing machine work and engine rebuilding for anything from a high performance diesel motor, tractors, race motors & daily drivers.
Price list
Below you will find some of RPM Machine, Inc. standard pricing for our commonly requested machine work. Prices are subject to change based upon the project. You will be notified prior to work being done if there is any price change. Shop Rate is $75.00 per hour.
GASOLINE ENGINES
Disassemble / Assemble Motor
Disassembly
Short Block ............................ $ 110.00
Long Block ............................. $ 165.00
Complete Motor....................... $ 220.00
Cylinder Heads (Ea.) .............. $ 55.00
Assembly
Short Block ............................ $330.00
Long Block ............................ $550.00
Complete Motor ...................... $825.00
SOHC Engine Assy ................... $660.00
DOHC Engine Assy .................. $770.00
Hot Tank / Sonic Wash
Heads (Ea.) ............................ $ 22.00
Short Block ............................. $ 110.00
Block Only .............................. $ 66.00
Crank Only ............................. $ 22.00
Long Block ............................ $ 165.50
Misc. Parts ............................. $ 55.00
Complete Motor ..................... $ 220.00
Connecting Rods .................... $ 16.75
Cylinder Head Work
Valve Jobs
2 Valves Per Cyl ......................... $28.60 ea.
3 Valves Per Cyl.......................... $36.30 ea.
4 Valves Per Cyl ......................... $52.80 ea.
5 Valves Per Cyl ......................... $60.50 ea.
Single Cylinder V.J. .................... $66.00
Other Cyl. Head Work
Valve Guide Replace ................ $ 13.20 ea.
Knurl Valve Guide ..................... $ 8.80 ea.
Valve Seat Replacement ............. $ 16.50 ea.
Mill Cylinder Head ...................... $ 75.35 ea.
Pressure Test Heads ...................$ 75.35 ea.
Install Helicoil ........................... $ 25.00 ea.
Bolt Extraction ............................$ 25.00 ea
Glass Beading ............................ Per Hour
Engine Block Work
Crank Shaft Work
Connecting Rods
Hone Block Per Cyl. ....................$ 11.00
Bore Block Per Cyl. ....................$ 27.50
Single Cyl. Hone ..........................$ 22.00
Single Cyl. Bore ..........................$ 66.00
Bore w/ Torque Plate. .................$ 55.00
Check Line Bore .........................$ 49.50
Line Hone Block ...........................$ 220.00
Mill Block .................................. $ 192.50
Install Cam Bearings .................. $ 60.50
Rem. & Rep. Dry Cyl. Sleeve ........$ 189.00
Install Cyl. Sleeves ......................$ 189.00
Bolt Extraction ...........................$ 25.00 ea
Polish Crank ............................ $ 49.50
Grind Crank ............................ $ 159.50
Balance Crank/Pistons .............. $ 275.00
Straighten Crank ...................... $ 52.50
Recondition Rods .................. $22.00 ea.
Torque and Check Rods .......... $6.25 ea.
Rem. & Rep. Pin Bushings ...... $ 16.50 ea.
Rem. & Rep. Pistons .............. $ 10.50 ea.
Gap Rings Per Cyl. ................. $ 10.32 ea.
Mill Flywheel / Brake Rotors & Drums
Magnafluxing
FLYWHEELS
STD Flywheel ........................... $49.50
Step Flywheel ........................... $82.50
Lge. Truck / Tractor ................ $69.30
BRAKE ROTORS / DRUMS
Small Rotors ....................... $ 14.30 ea.
Large Rotors ...................... $ 22.00 ea.
Brake Drums ........................ $ 22.00 ea.
Block ...................................... $ 55.00
Heads ea. ................................ $ 22.00
Crank Shaft ............................. $ 55.00
Connecting Rods ...................... $ 11.00
Misc. Parts .............................. $ 8.80